- Cold forged radiator, hollow cylindrical in cross section, increasing heat dissipation area
- Multiple heat dissipation: cold forged radiator, electric appliance cooling cavity, light source cavity radiator;
- The heat dissipation cavity of the appliance is mainly used for multiple heat dissipation. Due to the upward heat, the hot air from the cold forged radiator of the high-power industrial and mining lamp is further dissipated through the heat dissipation cavity. Secondly, a transformer is placed inside, and the heat sink can also be used. To dissipate the heat generated by the transformer;
- The tempered transparent piece is equivalent to a light bulb;
- Light source cavity radiator: not available in the prior art, and is mainly used to dissipate the heat emitted by the toughened transparent parts;
- Back cover: It is mainly used for power off and power off. The rear cover is installed separately from the electrical cooling cavity. The power off and open device is composed of upper and lower devices. The upper part is installed inside the back cover and connected by buckle. First, the three protrusions of the upper part correspond to the three notches of the back cover, and then rotate the upper part, and the three protrusions enter the card slot, so as to be snapped into the back cover;
- The lower part of the lid-opening power-off device and the heat dissipation cavity of the appliance are also connected in the same manner as the above, both of which are buckle-type
- Luminous efficiency and energy saving: The high-power industrial and mining lights use imported LED light sources with an average service life of up to 100,000 hours, eliminating the trouble and inconvenience of frequent bulb replacement. The configuration adopts new technology wide voltage power supply processing, and can achieve constant current output, which greatly improves the service life of the bulb.
- Professional design: integrated streamlined cylinder structure, uniform and soft light projection, especially suitable for fixed lighting in various high ceiling and high shed places. The inside of the lamp body adopts anti-seismic material and shock-absorbing structure, which can work for a long time in various high-frequency and strong vibration places.
- Protection grade: Shell protection grade IP65, anti-corrosion grade WF2, the shell will never corrode and never ruis.
- Installation method: Various installation methods such as ceiling and ceiling can be used as required.